Clearing Staple Jams
8-71
8
T
rou
b
lesh
o
o
ti
ng
NOTE
If there are no staples ready for stapling after the cover is closed, the stapler unit
automatically performs a "dry" stapling operation to reposition the staples.
Saddle Stitcher Unit (Optional)
If a staple jam occurs inside the saddle stitcher unit of the optional Saddle
Finisher-Y2, a screen similar to the one shown below appears on the touch panel
display. Check the location of the staple jam, and follow the procedure described
below, and the procedure that appears on the touch panel display, to remove any
jammed staples.
IMPORTANT
•
If necessary, make sure to remove all of the paper in the Booklet tray before clearing a
staple jam inside the saddle stitcher unit.
•
Make sure to close all covers and drawers of the machine before clearing any staple
jams.
1
Open the front cover of the finisher.
Summary of Contents for ImageRunner C2550
