Canon imageRUNNER C3025 User Manual Download

Page: 329 / 814

Address Book, and specify it. If the destination has not been registered in the Address Book, see

Registering Destinations(P. 180) .

Select <Reply To> in the <Send Settings> tab.

Select <Specify from Address Book>.

Select the check box for the desired reply-to address, and select <Apply>.

To specify priority

Select <Priority> in the <Send Settings> tab.

Select a priority level.

Select <Start>.

●

If the <Confirm Destination> screen is displayed, check whether the destination is correct, and then select
<Start Scanning>.

➠

Scanning of the original starts.

●

If you want to cancel, select <Cancel> <Yes>. Canceling Sending Documents(P. 302)

When placing originals in the feeder in step 1

When scanning is complete, the e-mails are sent.

When placing originals on the platen glass in step 1

When scanning is complete, follow the procedures below (except if you selected JPEG as a file format).

If there are additional pages of originals to be scanned, place the next original on the platen glass, and
select <Scan Next>.

●

Repeat this step until you finish scanning all of the pages.

●

When there is only one page to be scanned, proceed to the next step.

Press <Start Sending>.

➠

The e-mails are sent.

If the <SMTP Authentication> screen is displayed

●

Enter the user name and password, and select <Apply>.

●

If you always want to scan with the same settings: Changing the Default Settings for Functions(P. 173)

●

If you want to register a combination of settings to use when needed: Registering Frequently Used
Settings(P. 171)

●

If you want to specify the e-mail sender name: <Register Unit Name>(P. 540)

Scanning

320

Summary of Contents for imageRUNNER C3025















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3025

Reviews:

Related manuals for imageRUNNER C3025

Brands by name

Popular brands

Canon imageRUNNER C3025, User Manual

Search results

Summary of Contents for imageRUNNER C3025

Reviews:

Related manuals for imageRUNNER C3025

Brands by name

Popular brands