imageRUNNER C3170 Series Service Guide
F. Finisher-P1 (Option)
Finisher-P1 (Option)
Descending stack tray
Tray Type
Face-down stacking method
Stacking Method
12"x18" to STMT-R
Paper Size
17 lb. Bond- 90 lb Index (64- 163 gsm)
Paper Weight
One stack tray
Number of Trays
Mode
Staple stacking
Non staple stacking
(Offset stacking (30mm shift) included)
Collate/Non
collate Group
Small: Up to 500 sheets
Large: Up to 250 sheets
Stacking Capacity
(20 lb. Bond/ 80 gsm)
Staple Collate
Small: Up to 30 sets
Large: Up to 30 sets
Paper Sizes
(that can be shifted)
LTR, LGL, LTR-R, 11"x17"
DC24 V (Supplied by main unit AC power supply)
Power Source
Average: 40W (in use), 7W or less: (in Standby)
Power Consumption
Dimensions
(W x D x H)
Approximately 16.10” x 21.02” x 7.91” (409x 534 x 201 mm)
(Inside main unit)
Approximately 22.24” x 29.72” (565 x755 mm)
(Same as main unit dimensions)
Installation Space (W x D)
(when connected to main unit)
Approximately 24.2 lbs. (11.5kg)
Weight
Staple Mode
Punching by rotating cam
Staple Method
LTR, LGL, LTR-R, LDR (11"x17")
Sizes that can be stapled
17 lb. Bond- 90 lb. Index (64- 163 gsm)
Paper Weight
Stapled Sheets Capacity
Small: Up to 50 sheets
Large: Up to 30 sheets
Corner, double
Stapling Position
Approximately 5,000
Number Of Staples
Staples only
Staple Replacing
Staple-J1 (Canon exclusive staples)
Staple Type
Yes
Staple-Out Detection
No
Manual Stapling
39
Small Size: LTR, LTRR, STMT, STMTR, Large: 11”x17”
imageRUNNER C3170 Series Service Guide
Rev. 0
July 2005 Page 34