imageRUNNER C3170 Series Service Guide
Finisher-Q1/Q3 Saddle Finisher-Q2/Q4 with Buffer Pass Unit-C1 (Option)
Dimensions (W x D)
(when connected to main unit)
Approximately 61.57” x 29.72” (1564 x 755 mm)
Approximately 87.3 lbs. (39.6 kg)
Weight
Finisher-Q3 (Option)
Approximately 25-3/8” x 25-7/8” x 40-3/4” (645 x 657 x 1035 mm)
Dimensions (W x D x H)
Dimensions (W x D)
(
when connected to main unit)
Approximately 59-1/4” x 29-3/4” (1505 x 756 mm)
(with puncher unit equipped)
Approximately 97.1 lbs. (44 kg)
Weight
Saddle Finisher-Q2/Q4 (Option)
Approximately 29.38” x 25-7/8” x 40.75” (746 x 657 x 1035 mm)
Dimensions (W x D x H)
Dimensions (W x D)
(
when connected to main unit)
Approximately 67-7/8” x 29-3/4” (1724 x 756 mm)
(with puncher unit equipped)
Approximately 162 lbs. (73.48 kg)
Weight
H. Puncher Unit-M1 (Option)
Puncher Unit-M1 (Optional) Requires Finisher-Q3 & Saddle Finisher-Q2/Q4 (Option)
Hole Punching Method
Reciprocating System (Sequential Processing System)
2 hole LTR-R, LGL
Punchable Paper Sizes
3 hole LTR, 11x17
17 lb. Bond- 90 lb. Index (64 to 250 gsm)
Paper Weight
2 or 3 holes
Paper Hole Quantity
8.0 mm
Punch Hole Diameter
Approximately 12mm (±3mm) from the paper edge
Punch Hole Position
Approximately 3,000 sheets or more
Punch Waster Receptacle Capacity
2 holes
69.85 +/- 1 mm
Distance Between the Punch Holes
3 holes
108 +/- 1 mm
DC 24V (Supplied by finisher)
Power Supply
Power Consumption
In use: 15W or less (24V power supply)
In standby 0.8W or less (5V power supply)
Approximately 4 1/4” x 24 1/4 ” x 37 1/8” (107 x 614.8 x 941 mm)
Dimensions (WxDxH)
Weight
Approximately 15.6 lbs (7.2 kg)
imageRUNNER C3170 Series Service Guide
Rev. 0
July 2005 Page 36