Canon imageRUNNER C3480 Manual Download

Page: 27 / 448

Overview of the Color imageRUNNER C3480/C3480i/C3080/C3080i/C2550

1-5

Introd

ucti

the

Function

■

Special Features Screen 2/2

The screen below appears if you press [

] on the Special Features screen.

Image Creation

Press to manipulate the image on the copy by
selecting [Nega/Posi], [Image Repeat], [Mirror
Image], or [Area Designation].

Form Composition

Press to superimpose an image stored in
memory onto the original image for copying.

Secure Watermark

Press to embed hidden text in the background.
The hidden text will become visible if the
resulting output is copied.

Mode Memory

Press to store or recall copy modes.

Recall

Press to recall previously set copy modes.

Sharpness

Press to sharpen or soften the image of the
original on the copy.

Image Adjustment

Press to specify the settings for Image Quality
Adjustment, Color Balance, and One Touch
Color.

Watermark/Print Date

Press to include the watermark and date on
copies.

Pg/Copy Set Numbering

Press to include page and copy set numbers on
copies.

Store In User Inbox

Press to store originals scanned from the
Regular Copy Basic Features screen as a
document in a User Inbox.

Job Block Combination

Press to scan multiple batches of originals with
different copy settings and print them as one
document.

Summary of Contents for imageRUNNER C3480

































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands

Canon imageRUNNER C3480, Manual

Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands