Canon imageRUNNER C3480 Manual Download

Page: 399 / 448

Image Adjustment Settings

7-83

Using the Express Cop

sic

atures Scre

Prevent Bleeding

Press [Image Adjustment]

➞

[Image Quality Adjustment].

Press [Prevent Bleed-thru].

If you want to make fine adjustments to the density, press [Fine Adj.].

Press [Done].

Adjusting the Color (Color Balance)

For instructions on this procedure using the Regular Copy Basic Features screen,
see "Adjusting the Color," on p. 4-73.

Press [Image Adjustment]

➞

[Color Balance].

Press [-] or [+] to adjust the strength of each color.

If you want to adjust the saturation level, press [Saturatn]

➞

specify the setting.

If you want to adjust the hue level, press [Hue]

➞

specify the setting.

If you want to make fine adjustments for each color, press [Density Fine Adj.]

➞

specify the setting.

To register the specified color balance settings, press [Recall/Store]

➞

select the

key to recall color balance settings from

➞

press [Register].

To recall the specified color balance settings, press [Recall/Store]

➞

select a key

that already has settings stored on it.

To name the specified color balance settings, press [Recall/Store]

➞

select a key

that already has settings stored in it

➞

press [Register Name].

Summary of Contents for imageRUNNER C3480

































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands

Canon imageRUNNER C3480, Manual

Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands