background image

Two-Sided Copying/Printing

3-51

3

Basic Cop

y

ing

 a

nd Mail Bo

F

e

atures

2

Press [2

1-Sided].

To set the orientation of the originals, press [Option] 

 select the orientation of 

the originals 

 press [Done].

Details of each item are shown below.

3

Press [OK].

4

Press  

(Start).

 

Book to 2-Sided

This feature enables you to make two-sided copies from facing pages, or from the 
front and back sides of a page in bound originals, such as books and magazines.

Left/Right Two-sided
This setting makes two-sided copies from facing pages.

[Book Type]:

The front and back sides of the original have the same 
top-bottom orientation.

[Calendar Type]:

The front and back sides of the original have opposite 
top-bottom orientations.

Original

1

2

2

1

Copies

Summary of Contents for imageRUNNER C3480

































































































































































































































































































































































































































































Reviews: