Canon imageRUNNER C3480 Manual Download

Page: 201 / 448

Booklet Mode

4-23

Spe

ial Co

g and

Mai

x F

eatures

●

If you want to add a cover:

❑

Press [Add Cover]

➞

[Next].

❑

Select whether to copy on the cover page

➞

press [Next].

❑

Select the paper source to use for the cover page

➞

press [Next].

If you selected the paper to use for the cover from [Stack Bypass Settings],
select the paper type

➞

press [OK].

IMPORTANT

•

You must select the same paper size for the cover page as that used for copying
the main document.

•

If you are using Heavy 1 or Heavy 2 paper for the cover sheets, you can only print
on the inside of the front cover or inside of the back cover.

•

Only 17 to 28 lb bond (64 to 105 g/m

) paper can be used for the main document.

•

Only the following paper can be used for the cover pages, if you are printing on the
cover pages:

- If [Print] is selected for <Front Cover> or <Back Cover>:

17 to 28 lb bond (64 to 105 g/m

)

- If [Print] is selected for <Front Inside Cover> or <Back Inside Cover>:

17 lb bond to 80 lb cover (64 to 220 g/m

)

NOTE

•

If you are loading the paper for the cover page into a paper drawer, you must load
the paper face up.

•

If you are loading the paper for the cover page into the stack bypass, you must load
the paper face down.

Summary of Contents for imageRUNNER C3480

































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands

Canon imageRUNNER C3480, Manual

Search results

Summary of Contents for imageRUNNER C3480

Reviews:

Related manuals for imageRUNNER C3480

Brands by name

Popular brands