Making a Copy With the Express Copy Basic Features Screen
7-30
7
Using the Express Cop
y
Ba
sic
F
e
atures Scre
en
Collating Pages and Stapling (Staple)
For instructions on this procedure using the Regular Copy Basic Features screen,
see "Page Order (Staple)," on p. 3-41.
IMPORTANT
•
The Finishing modes cannot be set if [Envelopes], [Transparencies], [Tracing Paper], or
[Labels] is selected as the paper type.
•
The accuracy of folds created in the Saddle Stitch mode may vary, depending on the
paper type and the number of sheets.
•
The Staple mode can be set only if an optional finisher is attached.
•
If you set the Staple or Hole Punch mode, the side of the paper which is printed on will
always be output face down.
•
The Saddle Stitch mode is available only if the optional Saddle Finisher-Y2 is attached to
the Color imageRUNNER C3480/C3480i/C3080/C3080i. (The optional Saddle
Finisher-Y2 is not available for the Color imageRUNNER C2550.)
•
When printing on special types of paper, such as heavy paper or transparencies, be sure
to correctly set the paper type, especially if you are using heavy paper. If the type of
paper is not set correctly, it could adversely affect the quality of the image. Moreover, the
fixing unit may become dirty, or the paper could jam, and a service repair may be
needed.
1
Press [Staple].
The optional Finisher-Z1 or Finisher-Y1 is attached.
Press [Collate Not Set] if you do not want to collate the output.
Collate Not Set
Staple
Summary of Contents for imageRUNNER C3480
