background image

                  INSTALLATION MANUAL ON CISS FOR PRINTER CANON IP 1500

 

 

     

                                           

 
               Pic. 2-1                             Pic. 2-2                                  Pic.  2-3 
 

3.

 If printer is alright, please print a picture to see the result. 

 

Ill. Installation Procedures 

 

1. Make the system ready 

Put  this  system  on  the  right  side  of  the  printer,  tidy  up  ink  flow  tubes  (3-1-1), 

pull out all air plug and replace them with air filter with  bigger side downward (keep 
air  plug  for  next  use)  (3-1-2).  Move  tube  valve  to  close  position,  if  you  do  not  close 
this valve, ink maybe flow back, leak, or mis-color. 

 

 

 

                                     Pic. 3-1-1                                Pic. 3-1-2 
 

2. Install the CISS cartridges 

Turn the printer on, open it’s cover, cartridge holder will move to the "cartridge 

change"  position,  plug  the  power  source  off  (3-2-1),  take  the  original  cartridge  off. 
Take  cartridge  red  color,  clean  them  for  next  use).  Install  the  cartridges  according  to 
the color order; press back the cartridge cover (3-2-2). 
 

     

 

 
            Pic. 3-2-1                                  Pic. 3-2-2                               Pic/ 3-2-3 

Summary of Contents for IP 1500









Reviews: