WebCAM user manual -81-
Appendix A: Router Configuration
Proxim (http://www.proxim.com)
ORiNOCO BG-2000 Broadband Gateway
1. Log into your router using your router IP.
2. On the router’s main page, click on
Setup
at the top of the page.
3. On the left side of the page, click on
Advanced settings -> Port Forwarding
.
4. Check in the checkbox for
Enable Port Forwarding
.
5. Click
New
on the right side of the page.
6. Enter the following information on the page:
Global Port:
80
Local Address:
Type in the
camera’s IP address
, for example:
192.168.0.5
Local Port:
80
Type: TCP
7. Click
Save
to save the settings.
8. Click
New
on the right side of the page.
9. Enter the following information on the page.
Global Port:
9001
Local Address:
Type in the
camera’s IP address
, for example:
192.168.0.5
Local Port:
9001
Type: UDP
10. Click
Save
to save the settings.
11. Click
Restart
on the left side of the page to restart your router. WebCAM should
now be configured to work with your router and be accessible from the internet.
