Advanced Printing
26
About “Image optimize”
If you use a Canon PictBridge-compatible camera, you can select “VIVID”, “NR”, or
“VIVID+NR.” (Note that these options cannot be selected for some models.)
z
When “VIVID” is selected, green and blue portions of photos are
printed vividly.
z
When “NR” (Noise Reduction) is selected, noise in blue portions, such
as the sky, and dark portions is removed.
z
When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are
performed.
About “Date print”
If “On” is selected, the shooting date recorded in Exif image data is printed on the
lower-right corner of each photo.
z
This printer can handle only Exif/JPEG image data to produce photos
using PictBridge.
z
Never disconnect the USB cable during printing.
z
When disconnecting the USB cable between the digital camera and
printer, follow the instructions given in the Instruction Manual of
Camera.
z
Controls of the digital camera cannot be used for the following
functions:
- Print quality setting
- Printer maintenance
z
For the digital camera operation method and troubleshooting, refer to
your digital camera manual. For print error messages, see
“Cannot
Print Properly from the Digital Camera”
on page 80.
