4
Aligning the Print Head
1111
Open the paper support and pull out the
paper output tray.
2222
Load the A4/Letter-sized plain paper,
aligning it with the right side of the auto
sheet feeder.
3333
Pinch the paper guide and slide it
against the left side of paper.
4444
Align the print head.
Ensure that the message requesting head alignment is
displayed on the LCD:
• iP6220D
Use the
buttons to select
Yes
and then press the
OK
button.
• iP6210D
Use the
buttons to select
YES
and then press the
OK
button.
The pattern is printed. It takes about four minutes to
finish printing, and the print head is aligned
automatically.
5555
Ensure the pattern shown on the left is
printed.
The printer is now ready to use.
Ensure that the paper thickness lever is set to the left
position.
• If pattern is not printed successfully, refer to
“Aligning Print Head - Auto head align” in the
Direct Printing Guide
.
• The pattern is printed in black and blue.
Paper output tray
Paper support
Auto sheet feeder
Paper
guide
Paper thickness
lever
iP6220_6210D_QSG.fm Page 4 Tuesday, July 26, 2005 11:47 AM
