4
Insert the
Holder Stopper
from the right in the
Roll Holder
as shown. Holding it
at the position indicated (b), push it
fi
rmly in until the
fl
ange (a) of the
Holder
Stopper
touches the roll. Lock the
Holder Stopper
lever (c) by pushing it down
toward the shaft side.
Important
•
Insert the
Holder Stopper
fi
rmly onto the roll. Failure to do this may cause feeding
problems.
Note
•
Remove any loaded paper that will not be used.
•
If th e
Platen
is dirty, clean inside the
To p C o v e r
. (
→
P.
38
)
13
