manualshive.com logo in svg

Canon iPF8400S Series, Service Manual

The Canon iPF8400S Series is a professional-grade printer, offering stunning print quality and color accuracy. To assist users in setting up and maximizing their printer's potential, we provide a comprehensive Setup Manual that can be easily downloaded for free from our website, 88.208.23.73:8080.

Share
Download
background image

Chapter 7

7-19

1. Checking "OUTPUT 0" and "OUTPUT 1" when media (excluding clear film) is fed
[Check 1]
Check whether the multi sensor performance has degraded or whether the media is compatible with the multi sensor.

When "Media edge (diffuse reflection) gain" and "Media edge (diffuse reflection) current value" are maximum values and "Media edge (diffuse reflection) media
output" is 186 or less, an error occurs.
Maximum value of "Media edge (diffuse reflection)" gain: 255
Maximum value of "Media edge (diffuse reflection)" current value: 320

When the multi sensor and media are normal, the following values are displayed:

[Check 2]
Check whether the multi sensor performance has degraded or whether the media is compatible with the multi sensor.

When the difference between "Media edge (diffuse reflection) gain" and "Media edge (diffuse reflection) platen output" is 100 or less, an error occurs.
When the multi sensor and media are normal, the difference is about 300-600.

[Check 3]
Check the effect of external diffuse light.

When the difference between "Media edge (diffuse reflection) external light output" and "Media edge (diffuse reflection) platen output" is 500 or more, the effect
of diffuse light is judged as being great.
When the effect is normal, the difference is about 50-300.

[Check 4]
Check whether the media is compatible.

When the result of "Media edge (regular reflection) gain"x"Media edge (regular reflection) current value" is five times as large as the result of "Media edge (diffuse
reflection) gain"x"Media edge (diffuse reflection) current value", the media is judged as being incompatible with the multi sensor.
If the media is compatible, the result is about 0.5 to 1.5 times for plain/glossy paper; about 1-3 times for tracing paper.

[Check 5]
Check whether the media is compatible.

When the result of "Media edge (diffuse reflection) gain"x"Media edge (diffuse reflection) current value" is in one of the following, the media may be incompatible
with the multi sensor.
- Nine or more times as large as that of plain paper (normally, 2000-7000)
- Ten or more times as large as that of glossy paper (normally, 1600-5000)
- Three or more times as large as that of tracing paper (normally, 6000-20000)

2.  Checking "OUTPUT 0" when clear film is fed

[Check 1]
Check whether the multi sensor performance has degraded or whether the media is compatible.

When the "Media edge (regular reflection) gain" and "Media edge (regular reflection) current value" are maximum values and "Media edge (regular reflection)
media output" is 186 or less, an error occurs.
Maximum value of "media edge (regular reflection)" gain: 255
Maximum value of "media edge (regular reflection)" current value: 320

When the multi sensor and media are normal, the following values are displayed:

[Check 2]
Check whether the multi sensor performance has degraded or whether the media is compatible.

When the difference between "Media edge (regular reflection) gain" and "Media edge (regular reflection) platen output" is 100 or less, an error occurs.
When the multi sensor and media are normal, the difference is about 250-500.

[Check 3]
Check the effect of external diffuse light.

When the difference between "Media edge (regular reflection) external light output" and "Media edge (regular reflection) platen output" is 500 or more, the effect
of diffuse light is judged as being great.
When the effect is normal, the difference is about 50-300.

3. Checking "OUTPUT 2/OUTPUT 3" and "OUTPUT 4/OUTPUT 5/OUTPUT 6"

[Check 1]
Check whether the multi sensor performance has degraded or whether the media is compatible.

When "GAP gain" and "GAP current value" are maximum values and "GAP media output" is 93 or less, an error occurs.
Maximum value of "GAP gain": 255
Maximum value of "GAP current value": 320

When the multi sensor and media are normal, "GAP gain" is about 30-250; "GAP current value" is about 200.

Media edge (diffuse reflection) 

gain

Media edge (diffuse reflection) 

current value

Media edge (diffuse reflection) 

media output

Plain paper

About 10-35

About 200

About 500-600

Glossy paper

About 8-25

Tracing paper

About 30-100

Media edge (regular 

reflection) gain

Media edge (regular 

reflection) current value

Media edge (regular 

reflection) media output

Clear film

About 10-60

About 200

About 500-600

Summary of Contents for iPF8400S Series

























































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400S Series

Roland TrueVIS VG-640 User Manual preview
TrueVIS VG-640
Brand: Roland Pages: 200

Brands by name

Popular brands

Load more brands