manualshive.com logo in svg

Canon iPF8400S Series, Service Manual

The Canon iPF8400S Series is a professional-grade printer, offering stunning print quality and color accuracy. To assist users in setting up and maximizing their printer's potential, we provide a comprehensive Setup Manual that can be easily downloaded for free from our website, 88.208.23.73:8080.

Share
Download
background image

Chapter 1

1-3

1.2 Features

1.2.1 Features

0030-4812

- Media pass in widths up to 44 inches (1117.6 mm).
- Large ink tanks reduce the need for frequent ink replacement.
- Uninterrupted printing from subtanks.
- BK and MBK inks are loaded concurrently to eliminate the need for their replacement.
- A 8-color pigment ink system "LUCIA EX" is used to improve rubfastness, chromogenic effect, and bronzing resistance, ensuring higher-grade printing.
- A printing mode that improved control of the optimum ink droplet landing order (when in the mode for the highest image quality) and the ink droplet landing
accuracy ensure higher-grade printing.
- A printhead having nozzles (I-shaped nozzle) with a new shape reduces ink mist, ensuring superfine printing.
- The symmetrical order of the printhead's ink nozzle color reduces uneven print.
- The operation panel that equipped a 160 x 128-dot large LCD allows you to operate the printer intuitively.
- Media take-up unit (option) is supported.
- Media take-up unit (option) can be mounted concurrently with a basket.
- Durability will be added by maintenance kit.
- Barcodes printed on roll media makes measuring the remaining roll length more manageable.
- Borderless four-side printing support (roll media) reduces laborious cutting work, easing the job of creating posters to a significant degree.
- High-speed printing with a 1-inch head for each color (1280 nozzles), under bidirectional print control.
- The color calibration feature adds to the faithfulness of color reproduction.
- The network interface (10Base-T/100Base-TX/1000Base-T) compatible with 1000Base-T (Gigabit Ethernet) comes standard with the printer to cope with the
high-speed LAN environment.
- Compatibility with e-maintenance/imageWARE Remote allows centralized management of customer's printer information.
- The hard disk is installed for better print job management.

Functional enhancements new to this model include:
- The processing ability of the printed data will enhance by increase of hard disk drive capacity.
- A newly multi sensor has been able to perform a high accurate color calibration.

1.2.2 Printhead

0013-2742

The printhead that mounts on the carriage is an integrated six-color disposable printhead.
It has 2,560 nozzles for each color, comprising two rows of 1,280 nozzles each arranged in a staggerd pattern.
If print quality does not improve despite carrying out the specified cleaning, the printhead must be replaced with a new one.

F-1-3

1.2.3 Ink Tank

0017-8112

The ink tanks are disposable.
The ink tanks come with 8-colors: mat black(MBK), black(BK), photo cyan(PC), cyan(C), photo magenta(PM), magenta(M), yellow(Y) and gray(GY). Each of
these inks are pigment ink.
The ink tanks are also available in two capacities: 330 ml and 700 ml.
Each tank is furnished with a notch for preventing incorrect installation, which will allow the tank to be installed only at the position marked in the right color.
An ink tank should be replaced when an ink tank replacement prompt message appears.

F-1-4

Summary of Contents for iPF8400S Series

























































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400S Series

HP DesignJet Z6610 60 Manual preview
DesignJet Z6610 60
Brand: HP Pages: 80
HP Designjet T1200 series Assembly Manual preview
Designjet T1200 series
Brand: HP Pages: 20
HP 7475a Operation And Interconnection Manual preview
7475a
Brand: HP Pages: 101
HP C4507A Quick Reference Manual preview
C4507A
Brand: HP Pages: 32
HP Designjet 8000s Series Installation Manual preview
Designjet 8000s Series
Brand: HP Pages: 193
HP C4694A User Manual preview
C4694A
Brand: HP Pages: 91
HP DesignJet 650C C2858B Setting Up preview
DesignJet 650C C2858B
Brand: HP Pages: 103
HP C4705A User Manual preview
C4705A
Brand: HP Pages: 222
HP 650c - DesignJet Color Inkjet Printer User Manual preview
650c - DesignJet Color Inkjet Printer
Brand: HP Pages: 199
HP 7585B Service Manual preview
7585B
Brand: HP Pages: 197
HP 7470A Service Manual preview
7470A
Brand: HP Pages: 141
HP DesignJet 200 Service Manual preview
DesignJet 200
Brand: HP Pages: 246
HP C2858A Service Manual preview
C2858A
Brand: HP Pages: 198
HP 7470A Interfacing And Programming Manual preview
7470A
Brand: HP Pages: 230
HP Designjet 230 Service Manual preview
Designjet 230
Brand: HP Pages: 268
HP DesignJet 2000CP Service Manual preview
DesignJet 2000CP
Brand: HP Pages: 332
Raymarine Rayplot 700L User Manual preview
Rayplot 700L
Brand: Raymarine Pages: 70
Great Computer Corporation Expert 24 User Manual preview
Expert 24
Brand: Great Computer Corporation Pages: 35

Brands by name

Popular brands

Load more brands