manualshive.com logo in svg

Canon iPF8400SE imagePROGRAF, User Manual

The Canon iPF8400SE imagePROGRAF is a high-performance large format printer designed for professionals. To ensure hassle-free operation, a comprehensive and user-friendly User Manual is available for download, free of charge, from our 88.208.23.73:8080. This manual provides step-by-step instructions and helpful tips to optimize your printing experience.

Share
Download
background image

Cause

Corrective Action

The type of paper as specified on the
printer does not match the type speci-
fied in the printer driver.

2.

Change the type of paper in the printer driver and try printing again.

The paper is wrinkled or warped.

Straighten out the wrinkles or curls and reload the paper. Do not use paper that has been
printed on previously.
 (See "Loading Rolls in the Printer.")

➔

P.339

 (See "Loading Sheets in the Printer.")

➔

P.360

A cut line is printed because 

CutDus-

tReduct.

 is 

On

 in the Control Panel

menu to reduce cutting dust.

If this function is not needed, set 

CutDustReduct.

 to 

Off

 in the Control Panel menu.

 (See "Menu Settings.")

➔

P.446

The Printhead is set too low in the
Control Panel menu.

In the Control Panel menu, set 

Head Height

 to 

Automatic

.

 (See "Troubleshooting Paper Abrasion and Blurry Images.")

➔

P.524

You are printing on heavyweight paper
or paper that curls or wrinkles easily af-
ter absorbing ink.

For paper-based media such as Heavyweight Coated Paper, set the 

VacuumStrngth

 to

Strong

 or 

Strongest

 in the Control Panel menu. If the paper still rubs against the print-

head, set the 

Head Height

 in the Control Panel menu to a higher value than the current

setting.
 (See "Adjusting the Vacuum Strength.")

➔

P.532

 (See "Troubleshooting Paper Abrasion and Blurry Images.")

➔

P.524

For film-based media such as Tracing Paper, set the 

VacuumStrngth

 to 

Standard

,

Strong

 or 

Strongest

 in the Control Panel menu. If the paper still rubs against the print-

head, set the 

Head Height

 in the Control Panel menu to a higher value than the current

setting.
 (See "Adjusting the Vacuum Strength.")

➔

P.532

 (See "Troubleshooting Paper Abrasion and Blurry Images.")

➔

P.524

The Ejection Guide is soiled.

Clean the Ejection Guide.
 (See "Cleaning the Printer Exterior.")

➔

P.564

The surface of the paper is dirty

The surface of the paper is dirty

Cause

Corrective Action

The Paper Retainer is soiled.

Clean the Paper Retainer.
 (See "Cleaning Inside the Top Cover.")

➔

P.564

You are using a paper that
does not dry easily.

In the Control Panel menu, set 

Roll DryingTime

 to at least 

1 min.

 (See "Menu Settings.")

➔

P.446

When paper that does not dry easily is used for printing, it may curl during printing and touch the
Output Tray.
In this case, in the Control Panel menu, complete the settings for 

Dry time

 and 

Area

 in 

Scan

Wait Time

.

However, note that printing will now take longer.
 (See "Menu Settings.")

➔

P.446

The back side of the paper is dirty

The back side of the paper is dirty

Cause

Corrective Action

The Platen has become dirty after borderless
printing or printing on small paper.

Open the Top Cover and clean the Platen.
 (See "Cleaning Inside the Top Cover.")

➔

P.564

In the Control Panel menu, set 

CarriageScanWdth

 to 

Fixed

.

 (See "Menu Settings.")

➔

P.446

The Platen has become soiled because you have
set 

Width Detection

 to 

Off

 in the Control Panel

menu.

Set 

Width Detection

 to 

On

 in the Control Panel menu, and then open the Top

Cover and clean the Platen.
 (See "Cleaning Inside the Top Cover.")

➔

P.564

Open the Top Cover and clean the Platen. After this, manually advance the roll
onto the Platen before printing.
 (See "Cleaning Inside the Top Cover.")

➔

P.564

 (See "Feeding Roll Paper Manually.")

➔

P.349

The Platen suction is too strong.

In the Control Panel menu, reduce the level of 

VacuumStrngth

.

 (See "Adjusting the Vacuum Strength.")

➔

P.532

iPF8400SE

                                                                                                                                                                 

The surface of the paper is dirty

User's Guide

                                                                                                                                                                                                                     

 

 

Troubleshooting

Problems with the printing quality

593

 

Summary of Contents for iPF8400SE imagePROGRAF











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400SE imagePROGRAF

Brands by name

Popular brands

Load more brands