Important
•
After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some
Ink Tank Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed.
•
To close the Ink Tank Cover when no Ink Tank is
installed (as when moving the printer), push the
release lever (a) as shown while returning the
Ink Tank Lock Lever to the original position.
BK
MBK
GY
Y
M
a
Load the Ink Tank (700 ml)
1
Before opening the pouch, hold the new Ink Tank with
both hands and tilt it to the left and right as shown,
shaking gently it seven or eight times.
Caution
•
700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist. If you agitate it
using just your wrist, you may injure your wrist.
Important
•
Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.
•
If you do not agitate the Ink Tank, the ink may settle, which may affect printing quality.
Note
•
If the Ink Tank is cold, allow it to adjust to room temperature before attaching it to the printer.
Replacing Ink Tanks
iPF850 Series
Consumables and Maintenance
Ink Tanks
44
