Chapter 3
3-10
0001
The tray ascent/descent motor
(M5), the tray ascent/descent
motor clock sensor (PI9/PI19), or
tray home position sensor (PIE)
is faulty.
The ascent/descent operation does not end within 15
sec after the tray assent/descent motor has been
driven; or, the tray home position is not detected
when it has been driven for 15 sec.
0002
The tray upper limit detecting
switch (MS5) is faulty.
The tray upper limit detecting switch is ON during
tray ascent/descent operation.
0003
The tray ascent/descent motor
(M5) or the tray ascent /descent
motor clock sensor 1/2 (PI9/
PI19) is faulty.
There is no clock pulse for 0.2 sec or more from the
clock sensor when the tray ascent/descent motor has
been driven.
E577
There is a fault in stack processing (counterclockwise direction).
The stack processing motor (M2)
or the return controller home
position sensor (S3) is faulty. The
connector is disconnected. The
stack delivery lever or the return
roller is faulty.
The return roller fails to reach the return roller home
position sensor when the stack processing motor has
been driven for a required period of time.
E580
There is a fault in ascent/descent of the stack tray.
The stack tray ascent/descent
motor (M5), stack tray paper
height sensor (S10), or the stack
tray ascent/descent motor clock
sensor (S9) is faulty. The
connector is disconnected. An
excess load is imposed on the
stack tray ascent/descent motor.
The stack tray upper limit sensor goes ON while the
stack tray ascent/descent motor is in operation, or
the clock pulse of the stack tray direction motor
clock sensor is not detected 15 times or more within
0.8 sec.
The stack tray does not reach the stack tray height
sensor within 4 sec after the stack tray ascent/
descent motor has started ascent operation.
E584
There is a fault in feed operation (No. 2).
0001
The No. 2 feed motor (M8) or the
shutter open sensor (PI5) is
faulty.
The shutter open sensor does not go ON when the
No. 2 feed motor has been rotated in reverse for 1
sec or more.
0002
The No 2 feed motor (M8) or the
shutter closed switch (MS4) is
faulty.
The shutter closed switch does not go ON when the
No. 2 feed motor has been rotated in reverse for 1
sec or more.
0003
The safety area detecting switch
(MS3) or the shutter closed
switch (MS4) is faulty.
The shutter closed switch is OFF when the tray 1/2
is in the OFF position of the safety area switch while
the tray ascent/descent motor is in operation.
E5F0
There is a fault in paper positioning for the saddle.
Code
Detail
Description
Timing of detection
Summary of Contents for iR C3200 Series
