manualshive.com logo in svg

Canon iR C3380 series, Service Manual


Share
Download
background image

Chapter 11  

11-14

Application Name

It is the name (bundle-name) declared in a statement within the application program. It may not necessarily be identical to the name of the program.

Application ID/System Application Name

In the case of a system application, it will be the file name. If a general application, it is the application ID (application-ID) declared in a statement within the ap-

plication program. Within the device, the applications are set apart by means of their application IDs.

Application Version

It is the version of the application (bundle-version) declared in a statement within the application program.

Status

It indicates the status of the application in question; specifically,

Installed: the application has been installed.

Active: the application is being in use.

Resolved: the application is at rest.

Installed On

It indicates the date on which the application was installed.

Vendor

It is the name of the vendor that developed the application, and is the name (bundle-vendor) declared in a statement within the application program.

License Status

It indicates the status of the license; specifically,

None: no license is needed.

Not Installed: no license has been installed.

Installed: the appropriate license has been installed.

Invalid: the license has been invalidated.

Overlimt: the license has been used beyond its permitted limit.

License Expires After

It indicates the date after which the license expires. If the status of the license is 'none', this item will not be printed.

License Upper Limit

It indicates the limit imposed on individual counter readings. If the status of the license is 'none', this item will not be printed.

Counter Value

It is the current counter reading of a specific counter. If the status of the license is 'none', this item will not be printed.

Maximum Memory Usage

It indicates the maximum amount of memory that the application uses. It is the amount (maximum memory usage) declared in a statement within the application

program, and is expressed in kilobytes.

Registered Service

It is a list of services that have been registered by the application with the MEAP framework. Some services may not have printable data.

11.1.12 Installing an Application

0014-8076

 /  /  /  / iR C3380i / iR C3380 / iR C2880i / iR C2880

Important:

- To install an application, the user needs to use the following URL when accessing the license control system to obtain a license file. In doing so, he/she needs

to register the license access number of the application and the serial number of the device.

http://www.canon.com/meap/ 

- To install an application, the user needs to use the following URL when accessing the license control system to obtain a license file. In doing so, he/she needs

to register the license access number of the application and the serial number of the device.

- The applications that can be installed are 20 pieces or less. (In iR5020/iR6020/iR2220/iR3320/iR3320, one is the Portal Service already installed at time of

shipment from the factory.)

- The following list shows the resources and their sizes or numbers that the MEAP functions can use.  The values are for reference purpose only and actual values

vary among system configurations, login or authentication services, and device models.

T-11-12

- The area of the hard disk used by MEAP functions may be checked by referring to the item 'Hard Disk' indicated on the Application List.

- Some applications call for a specific set of conditions for installation. For details, see the User's Guide that comes with the individual applications.

1) Long on to SMS.

2) Click 

Install 

tab.

iR5020/iR6020/

iR2220/iR3320

iRC2620/

iRC3220

iR2270/iR2870/
iR3570/iR4570/

iR85/iR8070/

iR6570/iR5570

iRC3170/

iRC2570

iR7086/iR7095/

iR7105

iRC4080/
iRC4580/

iRC5180

imagePRESS 

C1

iRC2880/

iRC3380

HDD

300MB

400MB

400MB

400MB

400MB

1024MB

1024MB

1024MB

Memory

20MB

20MB

20MB

20MB

20MB

20MB

20MB

20MB

Thread

128

128

128

128

128

128

128

128

Socket

48

48

48

48

48

48

48

48

File  Description

42

42

42

42

42

42

42

42

Summary of Contents for iR C3380 series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iR C3380 series

IBM 3160 Introduction And Planning Manual preview
3160
Brand: IBM Pages: 102
QMS 2001 Setup Manual preview
2001
Brand: QMS Pages: 26
QMS 2060 WX User Manual preview
2060 WX
Brand: QMS Pages: 208
VASTEX V-1000 Installation And Operating Insctructions preview
V-1000
Brand: VASTEX Pages: 2
Xerox 8200DX - Phaser Color Solid Ink Printer Manual preview
8200DX - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 2
Lexmark J 110 Appletalk Manual preview
J 110
Brand: Lexmark Pages: 13
Xerox 8560MFPD - Phaser Multifunction Printer Color Laser Evaluator Manual preview
8560MFPD - Phaser Multifunction Printer Color Laser
Brand: Xerox Pages: 20
Jolimark NP311D Instruction Manual preview
NP311D
Brand: Jolimark Pages: 31
Go ET-15000 SP Setup preview
ET-15000 SP
Brand: Go Pages: 3
InfoSight LabeLase 1000Exhaust Operation Manual preview
LabeLase 1000Exhaust
Brand: InfoSight Pages: 38
Epson Small-in-One XP-330 Start Here preview
Small-in-One XP-330
Brand: Epson Pages: 4
Epson NX100 - Stylus All-In-One Quick Manual preview
NX100 - Stylus All-In-One
Brand: Epson Pages: 40
Epson NPD4910-01 Hardware Setup Manual preview
NPD4910-01
Brand: Epson Pages: 8
Epson NX415 - Stylus Color Inkjet Start Here Manual preview
NX415 - Stylus Color Inkjet
Brand: Epson Pages: 8
Epson NX300 - Stylus Color Inkjet Specifications preview
NX300 - Stylus Color Inkjet
Brand: Epson Pages: 2
Epson NX515 - Stylus Color Inkjet Instructional Manual preview
NX515 - Stylus Color Inkjet
Brand: Epson Pages: 4
Epson NX415 - Stylus Color Inkjet Specifications preview
NX415 - Stylus Color Inkjet
Brand: Epson Pages: 2
Epson NPD4937-00 Hardware Setup Manual preview
NPD4937-00
Brand: Epson Pages: 9

Brands by name

Popular brands

Load more brands