manualshive.com logo in svg

Canon iR C3380 series, Service Manual


Share
Download
background image

Chapter 17  

17-26

FSLUT-Y4

Partial ratio adjustment for Y-color images in the main scanning direction: 4
Correction value for the fourth block of partial ratio correction Y
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-Y5

Partial ratio adjustment for Y-color images in the main scanning direction: 5
Correction value for the fifth block of partial ratio correction Y
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-Y6

Partial ratio adjustment for Y-color images in the main scanning direction: 6
Correction value for the sixth block of partial ratio correction Y
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-Y7

Partial ratio adjustment for Y-color images in the main scanning direction: 7
Correction value for the seventh block of partial ratio correction Y
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-Y8

Partial ratio adjustment for Y-color images in the main scanning direction: 8
Correction value for the eighth block of partial ratio correction Y
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M1

Partial ratio adjustment for M-color images in the main scanning direction: 1
Correction value for the first block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M2

Partial ratio adjustment for M-color images in the main scanning direction: 2
Correction value for the second block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M3

Partial ratio adjustment for M-color images in the main scanning direction: 3
Correction value for the third block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M4

Partial ratio adjustment for M-color images in the main scanning direction: 4
Correction value for the fourth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M5

Partial ratio adjustment for M-color images in the main scanning direction: 5
Correction value for the fifth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M6

Partial ratio adjustment for M-color images in the main scanning direction: 6
Correction value for the sixth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M7

Partial ratio adjustment for M-color images in the main scanning direction: 7
Correction value for the seventh block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-M8

Partial ratio adjustment for M-color images in the main scanning direction: 8
Correction value for the eighth block of partial ratio correction M
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C1

Partial ratio adjustment for C-color images in the main scanning direction: 1
Correction value for the first block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C2

Partial ratio adjustment for C-color images in the main scanning direction: 2
Correction value for the second block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

FSLUT-C3

Partial ratio adjustment for C-color images in the main scanning direction: 3
Correction value for the third block of partial ratio correction C
When replacing the laser scanner unit, enter the value indicated on the label attached to the unit. When no value is 
entered, color misalignment occurs.
Setting range: 0 to 99

1

COPIER>ADJUST>LASER

Sub item

Description

level.

Summary of Contents for iR C3380 series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iR C3380 series

Qls 2000 Series Operation & Setup Manual preview
2000 Series
Brand: Qls Pages: 53
Xerox 2000 Series Operation Manual preview
2000 Series
Brand: Xerox Pages: 36
Samsung SCX-4300 - SCX 4300 B/W Laser User Manual preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 97
Samsung SCX 4828FN - Laser Multi-Function Printer Manual Del Usuario preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 151
Samsung SCX 4725FN - B/W Laser - All-in-One Manual Del Usuario preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 120
Samsung SCX 4500 - B/W Laser - All-in-One Manual Del Usuario preview
SCX 4500 - B/W Laser - All-in-One
Brand: Samsung Pages: 97
Samsung SCX 4200 - B/W Laser - All-in-One Manual Del Usuario preview
SCX 4200 - B/W Laser - All-in-One
Brand: Samsung Pages: 95
Samsung SCX 4500 - B/W Laser - All-in-One User Manual preview
SCX 4500 - B/W Laser - All-in-One
Brand: Samsung Pages: 172
Samsung ProXpress M337x User Manual preview
ProXpress M337x
Brand: Samsung Pages: 56
Samsung PROXPRESS M332 SERIES User Manual preview
PROXPRESS M332 SERIES
Brand: Samsung Pages: 50
Samsung ML-2240 - 23 Ppm Mono Laser Printer Manual Del Usuario preview
ML-2240 - 23 Ppm Mono Laser Printer
Brand: Samsung Pages: 82
Samsung ML-2150 Servicing Precautions preview
ML-2150
Brand: Samsung Pages: 8
Samsung ML-1610 - B/W Laser Printer User Manual preview
ML-1610 - B/W Laser Printer
Brand: Samsung Pages: 134
Samsung ML-1610 - B/W Laser Printer Manual Del Usuario preview
ML-1610 - B/W Laser Printer
Brand: Samsung Pages: 112
Samsung ML-1210 Manual Del Usuario preview
ML-1210
Brand: Samsung Pages: 128
Samsung ML ML-4551N Manual Del Usuario preview
ML ML-4551N
Brand: Samsung Pages: 152
Samsung ML 3471ND - B/W Laser Printer User Manual preview
ML 3471ND - B/W Laser Printer
Brand: Samsung Pages: 207
Samsung ML 2150 - B/W Laser Printer Manual Del Usuario preview
ML 2150 - B/W Laser Printer
Brand: Samsung Pages: 237

Brands by name

Popular brands

Load more brands