manualshive.com logo in svg

Canon iR C3380 series, Service Manual


Share
Download
background image

Chapter 17

17-39

17.5 FUNCTION (Operation/Inspection Mode)

17.5.1 COPIER

17.5.1.1 COPIER Table

0013-9278

 /  /  /  / iR C3380i / iR C3380 / iR C2880i / iR C2880

1. INSTALL

T-17-41

COPIER>FUNCTION>INSTALL

Sub item

Description

level.

STIR-4

This mixes the developing solutions inside the developers of all the colors.
The Y, M, C and Bk developers are raced for two minutes to ensure that the developing solutions are mixed.

1

STRD-POS

Automatic detection of CCD scanning position in DF stream reading

1

CARD

Used to make card reader installation settings.
Setting values  
1 to 2001 [Factory default/After RAM clear: 1]
Operation method Enter the number of cards to use. (You can use up to 1,000 cards from the entered number.) 
Initialize the card management information. 
- Initialize the card name (department ID) (from the entered number). 
- Initialize the card's password. 

1

KEY

Used to set management key function recognition.
Setting values  
0: Don't recognize management key function (value at time of factory shipment).  
1: Recognize management key function.  
Operation method 
1) Select COPIER > INSTALL > KEY, then enter '1' 
2) Turn the main power switch OFF/ON (the management key function is now recognized). 

1

AINR-OFF

Walm-up-rotation disable setting at initial installation
This disables the initialization of the P-CRG which is performed when a new P-CRG has been inserted.  It prevents the 
fuse from blowing when the P-CRG initialization has been completed.
It is used when replacing the P-CRG and checking the images in situations when, for instance, the causes of trouble are 
identified.  When it is set to "1," the initialization is canceled and the fuse is not blown even when a new P-CRG has been 
inserted.
Settings
0: Initialization is performed when a new unit is inserted.  The fuse is blown.
1: Initialization is not performed when a new unit is inserted.
[Factory setting/value after clearing RAM: 0]

1

E-RDS

E-RDS settings
Setting values
0: Not in use
1: In use
[Factory settings and after RAM clear: 0]

1

RGW-PORT

Specify port number of sales company server used in E-RDS
Setting range: 1 to 65535
[Factory settings and after RAM clear: ]

1

COM-TEST

Check connection with sales company server used in E-RDS
Checks sales company server connection.  Judges whether connection can be made and displays the results as OK or 
FAIL.

1

COM-LOG

Display detailed results of communication test with sales company server used in E-RDS
Displays information on any errors that have occurred in connection with sales company server. 

1

RGW-ADR

Specify URL of sales company server used in E-RDS
Sets sales company server URL.

1

CNT-DATE

Set timing of counter transmission to server
Sets time and date for start of transmission of counter information to server, via E-RDS third party extension function.
Setting range: YYYYMMDDHHMM (YYYY: year, MM: month,  DD: date, HH: hours, MM: minutes)
[Factory settings and after RAM clear::000000000000]
Note
This item is only displayed when the E-RDS third party extension function is enabled.Set timing of counter transmission 
to server
Sets time and date for start of transmission of counter information to server, via E-RDS third party extension function.
Setting range: YYYYMMDDHHMM (YYYY: year, MM: month,  DD: date, HH: hours, MM: minutes)
[Factory settings and after RAM clear:: 000000000000]
Note
This item is only displayed when the E-RDS third party extension function is enabled.

1

CNT-INTV

Set interval of counter transmission to server
Sets transmission intervals for transmission of counter information to server, via E-RDS third party extension function.

1

INIT-Y

Y color toner density signal (SGNL, REF) initial value reading
This is used when more than 100 sheets have passed through in error with a new CRG used in investigating image 
defects, etc.

2

INIT-M

M color toner density signal (SGNL, REF) initial value reading
This is used when more than 100 sheets have passed through in error with a new CRG used in investigating image 
defects, etc.

2

INIT-C

C color toner density signal (SGNL, REF) initial value reading
This is used when more than 100 sheets have passed through in error with a new CRG used in investigating image 
defects, etc.

2

INIT-K

K color toner density signal (SGNL, REF) initial value reading
This is used when more than 100 sheets have passed through in error with a new CRG used in investigating image 
defects, etc.

2

Summary of Contents for iR C3380 series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iR C3380 series

Canon FaxPhone L120 Starter Manual preview
FaxPhone L120
Brand: Canon Pages: 11
Canon imageRUNNER ADVANCE 8085 Maintenance Manual preview
imageRUNNER ADVANCE 8085
Brand: Canon Pages: 176
Canon FaxPhone L120 Software Manual preview
FaxPhone L120
Brand: Canon Pages: 85
Canon imageRUNNER 5070 Specification preview
imageRUNNER 5070
Brand: Canon Pages: 4
Canon imageRUNNER 5570 Specification preview
imageRUNNER 5570
Brand: Canon Pages: 4
Canon IMAGERUNNER 7095 PRINTER Brochure & Specs preview
IMAGERUNNER 7095 PRINTER
Brand: Canon Pages: 8
Canon IMAGERUNNER 7105 Service Manual preview
IMAGERUNNER 7105
Brand: Canon Pages: 21
Canon FaxPhone L120 Advanced Manual preview
FaxPhone L120
Brand: Canon Pages: 58
Canon IMAGERUNNER ADVANCE C5051 Manual preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 12
Canon imageRUNNER ADVANCE C2020 Setup Manual preview
imageRUNNER ADVANCE C2020
Brand: Canon Pages: 68
Canon imageRUNNER ADVANCE 6055 Maintenance Manual preview
imageRUNNER ADVANCE 6055
Brand: Canon Pages: 134
Canon Color imageRUNNER LBP5970 Getting Started Manual preview
Color imageRUNNER LBP5970
Brand: Canon Pages: 67
Canon FAXPHONE L170 - B/W Laser - Copier Starter Manual preview
FAXPHONE L170 - B/W Laser - Copier
Brand: Canon Pages: 12
Canon FAXPHONE L100 Technical Information preview
FAXPHONE L100
Brand: Canon Pages: 2
Canon imageRunner 1133 Starter Manual preview
imageRunner 1133
Brand: Canon Pages: 60
Canon Color imageCLASS MF8280Cw Getting Started Manual preview
Color imageCLASS MF8280Cw
Brand: Canon Pages: 36
Canon FAX-L380 Software Manual preview
FAX-L380
Brand: Canon Pages: 104
Canon imagePROGRAF iPF8300 Setup Manual preview
imagePROGRAF iPF8300
Brand: Canon Pages: 16

Brands by name

Popular brands

Load more brands