manualshive.com logo in svg

Canon iR C3380 series, Service Manual


Share
Download
background image

Chapter 17  

17-74

5. INT-FACE

T-17-59

6. LCNS-TR

T-17-60

COPIER>OPTION>INT-FACE

Sub item

Description

level.

IMG-CONT

Used to set connection to PS print server unit.
Setting values 
0: Normal mode (no PS print server unit) [Factory default]
1: Not used  
2: Not used  
3: PS print server unit  
4: Not used  
5: Not used  

Attention:

When 1 is selected as the setting value, the following user mode items are restored to their initial values: 
- System management settings > Network settings > TCP/IP settings > IP
address settings > IP address
- System management settings > Network settings > TCP/IP settings > IP
address settings > Sub-net mask
- System management settings > Network settings > TCP/IP settings > IP
address settings > Gateway address 
- System management settings > Network settings > Ethernet driver settings
> Communication method
- System management settings > Network settings > Ethernet driver settings
> Ethernet type
- System management settings > Network settings > Startup time 
- Common specifications settings  
The following user mode settings are turned OFF:
- System management settings > Network settings > TCP/IP settings > IP address setting > DHCP use 
- System management settings > Network settings > TCP/IP settings > IP
address settings > RARP use
- System management settings > Network settings > TCP/IP settings > IP
address settings > BOOTP use 
- System management settings > Network settings > Ethernet driver settings
> Automatic detection
- System management settings > Network settings > Spool function use
When 3 or 4 is selected as the setting value, the following settings are
turned OFF in addition to the items above.
- System management settings > Network settings > TCP/IP settings >
RAW setting
- System management settings > Network settings > TCP/IP settings > LPD
setting
- System management settings > Network settings > TCP/IP settings > IPP
printing
- System management settings > Network settings > SMB setting
The items above are not restored when the setting value is returned to "0:
Normal mode", so must be set again as needed. 

1

AP-OPT

Used to set whether printing from application PrintMe in PS print server unit is possible.
0: Printing permitted for all department IDs [Factory default/After RAM clear]
1: Printing refused (printing is only possible for specified department ID).

2

AP-ACCNT

Used to set (CPCA) department ID for printing (print jobs) from application PrintMe in PS print server unit.
0 to 9999999 [Factory default/After RAM clear: 0]

2

AP-CODE

Use it to set a path for printing from an external controller (CPCA).
Setting: 0 [Factory default/After RAM clear]
Setting range: 0 to 9999 

2

NWCT-TM

Sets the time limit for maintaining the network connection ('KeepAlive' setting).
Sets the length of time that the PC application and the iR device can be kept connected (KeepAlive) via the network. 
Main PC applications (envisaged): network printing application, email function, remote copy printer function, MEAP 
network applications, etc.  

Setting range: 1 to 5 (min.)
[Factory settings and after RAM clear: 5]

2

COPIER>OPTION>LCNS-TR

Sub item

Description

level.

ST-SEND

Use it to select whether to display the installation status of the SEND function when the transfer function is set invalid.
Setting value
0: SEND function not available (not installed)
1: SEND function available (installed)
[Factory default/After RAM clear]

2

TR-SEND

Use it to obtain the transfer license key for the SEND function when the transfer function is set invalid.
Obtains the transfer license key to use the SEND function in other MFP machine.

2

OF-SEND

Use it to select whether to use the SEND function when the transfer function is set invalid.
Setting value
0: Do not use SEND function.
1: Use SEND function.
[Factory default/After RAM clear]

2

ST-ENPDF

Use it to display the installation status of the SEND encryption PDF transmission function when the transfer function is 
set invalid.
Setting value
0: SEND encryption PDF transmission function not available (not installed)
1: SEND encryption PDF transmission function available (installed)
[Factory default/After RAM clear: 0]

2

Summary of Contents for iR C3380 series



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iR C3380 series

Oki MC160N User Manual preview
MC160N
Brand: Oki Pages: 268
Oki LE810DT Manual De L'Utilisateur preview
LE810DT
Brand: Oki Pages: 54
Oki LE810DT Guías Del Usuario Manual preview
LE810DT
Brand: Oki Pages: 54
Oki MB460MFP Manual Do Usuário preview
MB460MFP
Brand: Oki Pages: 202
Oki MB460MFP Manual De L'Utilisateur preview
MB460MFP
Brand: Oki Pages: 201
Oki ES2232a4 User Manual preview
ES2232a4
Brand: Oki Pages: 103
Oki ES3037 User Manual preview
ES3037
Brand: Oki Pages: 256
Oki B710dn Hardware Manual preview
B710dn
Brand: Oki Pages: 2
Oki B710dn Material Safety Data Sheet preview
B710dn
Brand: Oki Pages: 36
Oki B6500 Series Guia Del Usuario De Redes preview
B6500 Series
Brand: Oki Pages: 63
Oki B6500 Series Customer Support Information preview
B6500 Series
Brand: Oki Pages: 28
Oki B6500 Series Service Manual preview
B6500 Series
Brand: Oki Pages: 616
Oki B411d Safety Information Manual preview
B411d
Brand: Oki Pages: 32
Oki B411d User Manual preview
B411d
Brand: Oki Pages: 138
Oki Microline 320 Turbo D1 Brochure & Specs preview
Microline 320 Turbo D1
Brand: Oki Pages: 2
Oki ML320 Epson/IBM Safety & Warranty preview
ML320 Epson/IBM
Brand: Oki Pages: 32
Oki B4400 Series Safety Information Manual preview
B4400 Series
Brand: Oki Pages: 32
Oki MB780 Guía De Consulta Rápida preview
MB780
Brand: Oki Pages: 14

Brands by name

Popular brands

Load more brands