54
2.1
Relocating the Machine
0002-6757
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
If you need to relocate the machine after installation, be sure to go through the following:
1) Remove all paper from the left/right deck and the cassettes.
2) Turn off the main power switch, and disconnect the power plug. If the grounding wire is connected, remove it.
3) Fix the scanner in place using the scanner fixing screw stored away from the time of installation.
4) Take out the black toner bottle, all color developing assemblies, and all color toner cartridges, and put them in
separate boxes.
5) Tape the toner supply mouths of the developing rotary in place as soon as developing assemblies have been
removed. Also, be sure to fix the developing assembly fixing arm in place using a screw.
F-2-1
6) Tape the fixing/feeding assembly releasing lever in place to protect against vibration.
7) Secure the covers, decks, and cassettes in plase using tape.
8) Place A3 copy paper on the copyboard glass, and tape the ADF in place.
1. If you must use a flight of stairs, keep the following in mind:
2. The machine weighs about 230 kg; be sure to work in a group of 4 persons.
3. Check to be sure that the 2 adjusters on the bottom plate of the machine are released; moreover, be sure not to lose
them, as they tend to slip out because of the movement of the machine during relocation.
4. If a side paper deck or a finisher (accessory) is installed, be sure to detach it before starting to move the machine.
[1]
Summary of Contents for iR C6800 Series
