Chapter 2
2-48
5) Execute the following service mode item
(compulsive initial rotation sequence):
COPIER>FUNCTION>MISC-P>INTR-EX.
6) Execute auto gradation correction in user mode
(adjust/cleaning>auto gradation correction>full
correction).
7) You will have to dispose of the waste toner in the
waste toner bottle.
After replacing the DC controller PCB or
initialized the RAM, you have to dispose waste
toner, because you cannot enter a setting for the
following in service mode:
COUNTER>MISC>WASTE-TNR.
2.7.3
Points to Note When
Mounting the DC
Controller PCB/ DC
Controller Box
0005-7222
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
During assembly work, be sure to connect the
harness to the DC controller PCB as follows:
- Connect the connector of the harness [1] first, and
then the other harness [2].
- Fix the harnesses [1] [2] in place using the wire
saddle [3] so that the harness [1] is on the left side of
the harness [2].
F-2-92
Supplementary Information:
If the harness [1] is away from the side plate [4] of the
DC controller box, wrong detection (E070-0102) of
the ITB home position tends to occur because of
noise.
2.7.4
After Replacing the
Main Controller PCB
(main)
0004-1717
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
After mounting the main controller PCB (main), be
sure to mount the PCBs you may have removed before
replacing the main controller PCB:
1 boot ROM
2 image memory (SDRAM)
3 expansion bus PCB
4 main controller PCB (sub)
5 UFR board (optional)
6 Ethernet board
[2]
[1]
[3]
[3]
[3]
[3]
[4]
Summary of Contents for iR C6800 Series
