Revised Jan 2010
Page 12 of 25
TAB 3 –Paper Source
The Paper Source Tab is used for:-
1.
Paper Selection, click on for having different media types for the First and Last page, or
different media for First, Second and Last page, or Inserting Sheets on specific page numbers
or it can be used for transparency interleaving. This would only work if you had different paper
types in the drawer and the stack bypass. If you have an extra drawer, you may want to place
plain paper in drawer 1 and headed paper in drawer 2. Then selecting different media types is
possible
2.
Paper Source, click on this key to tell the device where you have loaded the stock you want to
print onto. You need to use the stack bypass for transparencies, light card, labels etc.