COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
CANON iR1200/iR1300 Series REV. 0 AUG. 2002
7-95
CHAPTER 7 TROUBLESHOOTING
5.3 Original Jams (if equipped with ADF functions)
General conditions
1) Are the following rollers of the ADF rotating?
•
original separation roller
•
ADF registration roller
•
white roller
•
original feed roller
•
original delivery roller
YES: Go through steps 2) to 6).
NO:
Go to step 7).
General conditions
2) Is the ADF closed firmly?
NO:
Close it firmly.
Original
3) Is the original placed correctly?
NO:
Place the original correctly.
Stack of originals
4) Is the stack of originals in the original placement assembly more
than allowed?
YES: Advise the user on the number of originals that may be paled in the
original placement assembly.
Original
5) Is the original curled or do originals bond together because of static
charge?
YES: Advise the user that the cause is the originals. Remove the curl,
and fan out the originals.
Roller (ADF)
6) Is the surface of the following roller of the ADF normal?
•
original separation roller
•
ADF registration roller
•
white roller
•
original feed roller
•
original delivery roller
NO:
Clean any soiled roller. If scratched, replace it.
Gear, Belt (drive assembly)
7) Is any of the gears or the belts in the drive assembly cracked or
damaged?
YES: Replace the damaged gear/belt.
