CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
CANON iR1200/iR1300 Series REV. 0 AUG. 2002
2-42
#1 SSSW-SW14: inch/meter resolution setting
Bit
0
1
2
3
4
5
6
7
Function
paper size identification
paper size identification
inch/meter resolution conversion
scanning direction
not used
declare inch resolution
not used
not used
not used
1
1
1
main/sub scan-
ning
-
declare
-
-
-
0
0
0
sub scanning
only
-
do not declare
-
-
-
Factory setting
0
0
1
0
[Bit 0, 1]
Use a combination of bit 0 and bit 1 to set the size of paper (default side).
•
if 0 and 0, A/B-configured paper.
•
if 0 and 1, inch-configured paper
•
if 1 and 0, A-configured paper
•
if 1 and 1, A/B-configured paper
[Bit 2]
Use it to specify whether to convert an inch resolution into a metric resolution for images
read at time of G3 transmission only in sub scanning direction or in both main and sub scan-
ning direction.
The setting made here is effective only if bit 1 of SW05 of #1 SSSW is set to ‘1’.
[Bit 4]
Use it to specify whether or not to declare an inch resolution to the other party at time of
G3 communication.
If set to ‘1’, a declaration will be made using the DIS, DCS, or DTC signal to the effect
that the machine is designed to read and record images at an inch resolution.
Memo
The type of image and the direction of scanning for inch/meter resolution
conversion are determined by combinations of bits 1 and 2 of SW05 and bit
2 of SW14 of #1 SSSW as well as the type of dialing used.
