CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
CANON iR1200/iR1300 Series REV. 0 AUG. 2002
2-46
#1 SSSW-SW28: V.8/ V.34 protocol settings
Bit
0
1
2
3
4
5
6
7
Function
Caller V.8 protocol
Called party V.8 protocol
Caller V.8 protocol late start
Called party V.8 protocol late start
V.34 reception fallback
V.34 transmission fallback
not used
not used
1
No
No
No
No
Prohibited
Prohibited
-
-
0
Yes
Yes
Yes
Yes
Not
prohibited
Not
prohibited
-
-
Factory setting
0
0
0
0
0
0
[Bit 0]
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used.
[Bit 1]
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is in-
hibited when called and the V.21 protocol is used.
[Bit 2]
If ANSam signal is not received during transmission (mainly manual transmission), select
whether to use the V.8 protocol when the other fax machine declares the V.8 protocol in DIS
signal. If NO is selected, the CI signal is not transmitted and the V.8 protocol is not used
even if the DIS that specifies the V.8 protocol is received.
[Bit 3]
Select whether to declare the V.8 protocol in DIS signal for reception (mainly caller manual
transmission). If NO is selected, the V.8 protocol cannot be used because it is not declared in
DIS signal.
[Bit 4]
Select whether the receiver falls back during V.34 reception. If “Prohibit” is selected, the re-
ceiver does not fall back.
[Bit 5]
Select whether the transmitter falls beck during V.34 transmission. If “Prohibit” is selected,
the transmitter does not fall back.
