Canon iR2018i Reference Manual Download

Page: 270 / 444

Department ID Management

6-17

ste

anag

tti

ngs

Change the page limit restriction if necessary.

❑

Press [On] under the desired function(s).

❑

Press [

] (Page Limit) next to [On]/[Off] of the desired function(s)

➞

enter the page limit

restriction using

(numeric keys).

❑

Press [OK]

➞

[OK].

If you do not want to set a page limit restriction for a function, press [Off] under the desired
function’s name.

The page limit(s) for the selected function(s) are set.

NOTE

•

If you make a mistake when entering a number, press

(Clear) to clear the number.

•

You can set the page limit from 0 to 999,999 pages. Once the page limit is reached, copying,
scanning, or printing is not possible.

•

The page limit refers to the number of printed surfaces. Therefore, a two-sided print is counted as
two pages.

Summary of Contents for iR2018i





























































































































































































































































































































































































































































Search results

Summary of Contents for iR2018i

Reviews:

Related manuals for iR2018i

Brands by name

Popular brands

Canon iR2018i, Reference Manual

Search results

Summary of Contents for iR2018i

Reviews:

Related manuals for iR2018i

Brands by name

Popular brands