CHAPTER 4 SERVICE MODE
4-46
COPIER>ADJUST
<ADJ-XY>
Executing Image Read Start Position Adjustment
If you have cleared the RAM on the reader controller PCB, enter the settings indicated on
the service label.
ADJ-X
Use it to adjust the scanner image leading edge position.
Range of
250 to 290 (A change of ‘1’ causes a shift of 0.1 mm.)
adjustment
Caution
Be sure to execute this mode before adjusting the margin.
Do not use this mode to create a margin.
ADJ-Y
Use it to adjust the CCD read start position.
Range of
100 to 400 (A change of ‘1’ causes a shift of 0.1 mm.)
adjustment
F04-401-03
F04-401-04
Vertical size plate
Standard white plate
Higher setting
Lower setting
Copyboard glass
Lower setting
Higher setting
Original
Vertical size plate
Read start position
Summary of Contents for IR5000 - iR B/W Laser
Page 72: ...CHAPTER 2 STANDARDS AND ADJUSTMENTS 2 52 Blank Page ...
Page 104: ......
Page 224: ......
Page 234: ......