COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 4 IMAGE FORMATION SYSTEM
4-77 P
8) Remove the two mounting screws [13],
and detach the blade [14] together with
its mounting plate.
F04-709-10
9) Remove the bearing [15] at the front
and the rear, and detach the developing
cylinder [16].
F04-709-11
Do not leave fingerprints or oils
on the surface of the developing
cylinder. Otherwise, dry wipe it
with lint-free paper. (Do not use
solvent.)
7.9.5 Cleaning the Developing Anti-Stray Sheet
1) Remove the developing assembly, and
clean the developing anti-stray sheet
[1].
F04-709-12
[13]
[14]
[13]
[15]
[16]
[15]
[1]