COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 8 PAPER DECK
8-32 P
3.3.3 Removing the Deck Lifter Motor (M102)
1) Open the compartment of the deck, and
remove all paper.
2) Turn on the host machine; if the lifter of
the deck is up, push the sensor lever [1]
of the paper supply position sensor
found inside the compartment with your
finger to move the lifter [2] about 7 cm
from the base plate of the compartment.
Then, insert a hex wrench into the hole
of the lifter drive shaft [3] to hold the
shaft in place.
F08-303-03
F08-303-04
[1]
[2]
about 7 cm
[2]
[3]
[4]