COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
5-46 T
COPIER>ADJUST
<ADJ-XY>
Executing Image Read Start Position Adjustment
If you have cleared the RAM on the reader controller PCB, enter the settings indicated on
the service label.
ADJ-X
Use it to adjust the scanner image leading edge position.
Range of
250 to 290 (A change of ‘1’ causes a shift of 0.1 mm.)
adjustment
Caution
Be sure to execute this mode before adjusting the margin.
Do not use this mode to create a margin.
ADJ-Y
Use it to adjust the CCD read start position.
Range of
100 to 400 (A change of ‘1’ causes a shift of 0.1 mm.)
adjustment
F05-401-03
F05-401-04
Vertical size plate
Standard white plate
Higher setting
Lower setting
Copyboard glass
Lower setting
Higher setting
Original
Vertical size plate
Read start position