COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
5-62 T
SHDG-POS
Use it to enter data for changing the position of measurement on the stan-
dard white plate used for shading correction.
Range of
216 to 296 (a multiple of 8 causes a shift of about 0.189 mm)
adjustment
Caution
•
If dirt is found on the copyboard glass, execute this mode to avoid the
area when reading the standard white plate.
•
You must execute the following if you have changed the setting:
COPIER>FUNCTION>CCD>SH-PS-ST.
F05-501-03
Vertical
size plate
Standard white plate
Lower setting
Higher setting
Copyboard glass
Shading
position
COPIER>FUNCTION
