Loading Paper
2-5
Rout
in
e Main
te
nan
ce
2
NOTE
•
Paper Drawers 1 and 2 hold approximately 1,500 sheets of paper (80 g/m
2
).
•
Paper Drawers 3 and 4 hold approximately 550 sheets of paper (80 g/m
2
).
•
If there are instructions on the package of paper about which side of the paper to load, follow those
instructions.
•
When the paper is loaded into the paper drawer, the side facing down is the one printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload
it.
•
For more information on the print direction of preprinted paper (paper which has logos or patterns
already printed on it), see "Relationship between Original Orientation and Preprinted Paper Output
Chart," in the Reference Guide.
5
Gently push the paper drawer back into
the machine until it clicks into place in
the closed position.
CAUTION
When returning the paper drawer to its original
position, be careful not to get your fingers caught,
as this may result in personal injury.
IMPORTANT
You will not be able to make copies or print if you load
paper that exceeds the loading limit, or if the paper
drawer is not completely pushed into the machine. Always check that the paper drawers are in place.
If a paper drawer is overloaded, decrease the amount of paper so that it does not exceed the loading
limit.
NOTE
If paper runs out during copying or printing, load a new paper stack, and follow the instructions on the
touch panel display. The machine automatically restarts, and produces the remaining copies or prints.
Summary of Contents for iR5055
