Chapter 10
10-28
F-10-90
10.5.18 HVT PCB
10.5.18.1 Before Removing HVT PCB
0015-5139
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-22)
Reference[Removing the Charger unit]
2) Remove the rear cover (upper).
(page 10-13)
Reference[Removing the
Rear Cover (Upper)]
3) Detach the rear cover (lower).
(page 10-13)
Reference[Removing the
Rear Cover (Lower)]
10.5.18.2 Removing HVT PCB
0015-5140
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the grounding wire [2].
- 1 screw [1]
2) Disconnect the 9 connectors [3].
3) Remove the HVT PCB [5].
- 4 screws [4]
F-10-91
10.5.18.3 When Replacing HVT PCB
0015-9992
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
Enter the values indicated on the label of the HVT PCB using the following
service mode items:
COPIER>ADJUST>HV-TR>H-PRE-TR
COPIER>ADJUST>HV-TR>HVT-TR
COPIER>ADJUST>HV-SP>HVT-SP
COPIER>ADJUST>DEVELOP>HVT-DE
10.5.19 Separation Clew AC bias PCB
10.5.19.1 Before Removing Separation Claw AC PCB
0015-9422
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Detach the rear cover (upper).
(page 10-13)
Reference[Removing the
Rear Cover (Upper)]
2) Detach the main controller box cover.
(page 10-17)
Reference[Removing
the Main Controller Box Cover]
3) Detach the right cover (upper rear).
(page 10-12)
Reference[Removing
the Right Cover (Upper Rear)]
4) Remove the main controller box.
(page 4-13)
Reference[Removing the
Main Controller Box]
10.5.19.2 Removing Separation Claw AC PCB
0015-9423
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the separation claw AC PCB unit [3].
- 1 connector [1]
- 2 screws [2] (free the grounding wire)
F-10-92
10.5.20 Motor Driver PCB
10.5.20.1 Before Removing Motor Driver PCB
0015-5143
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-22)
Reference[Removing the Charger unit]
2) Remove the rear cover (upper).
(page 10-13)
Reference[Removing the
Rear Cover (Upper)]
3) Remove the rear cover (lower).
(page 10-13)
Reference[Removing the
Rear Cover (Lower)]
4) Remove the main controller box cover.
(page 10-17)
Reference[Remov-
ing the Main Controller Box Cover]
5) Remove the right cover (upper rear).
(page 10-12)
Reference[Removing
the Right Cover (Upper Rear)]
6) Remove the main controller box.
(page 4-13)
Reference[Removing the
Main Controller Box]
7) Remove the right cover (lower rear).
(page 10-12)
Reference[Removing
the Right Cover (Lower Rear)]
8) Remove the collecting toner bottle holder.
(page 5-29)
Reference[Re-
moving the Collecting Toner Bottle Holder]
10.5.20.2 Removing Motor Driver PCB
0015-5147
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the motor driver PCB [2].
- 6 screws [1]
- 10 connectors
F-10-93
10.5.21 Primary Fan Duct
10.5.21.1 Before Removing Primary fan Duct
0015-9386
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
[1]
[1]
[2]
[1]
[2]
[3]
[4]
[4]
[5]
[2]
[1]
[3]
[4]
[4]
[1]
[2]
[3]
[1]
[1]
[1]
[2]
Summary of Contents for iR5055
