Canon iR5055 Service Manual Download

Page: 576 / 646

Chapter 17

17-44

U-PASWD

Use it to set user passwords permitting connection to the SSH server.
setting
8 characters max. (alphanumeric)

DA-PORT

Use it to enable/disable the port for TOT asynchronous status communication.
setting
0: close (default)
1: open (w/ DA installed)

DA-CNCT

Use it to set the DA.
setting
0: off (default)
1: on

CHNG-STS

Use it to set the TOT status connection port number.
setting
1 to 65535 (default: 20010)

CHNG-CMD

Use it to set the TOT command connection port number.
setting
1 to 65535 (default: 20000)

MEAP-DSP

Use it to enable/disable a shift from the MEAP to native screen.
setting
0: off (shift to native seen; default)
1: on (do not shift to native screen)

ANIM-SW

Use it to enable/disable display of the Error/Jam screen with a MEAP application in operation.
setting
0: off (display warning screen; default)
1: on (do not display warning screen)

MEAP-SSL

Use it to set the HTTPS port for MEAP.
setting
0 to 65535 (default: 8443)

STNBY-TM

Use it to switch over the standby shift time.
setting
0: normal (default)
1: increase standby shift time until possibility of image distortion is absent

KSIZE-SW

Use it to enable/disable support of K paper.
setting
0: do not support K paper (default)
1: support K paper
procedure
1) Set '0' in this service mode.
2) Set '0' for the following: COPIER > OPTION > BODY > MODEL-SZ.
3) Perform the shut-down sequence, and turn off and then on the main power.

POST-DWN

A countermeasure mode to prevent smudges from appearing on the lead edge of an image (caused by pre-transfer upper guide) in
the HH environment

Decrease the post high pressure output value from 280uA to 70uA only in the HH environment, as an individual countermeasure,
in order to prevent smudges from appearing on the lead edge of an image caused by the pre-transfer upper guide.
0: Normal (default)
1: Countermeasure mode (A post high pressure value is automatically changed when an HH environment is detected by the
environment sensor.)

IMP-MISS

Set OFF/ON for detection of "unmatched" error in the number of printouts.
Setting value:
0: OFF [default]
1: ON

UI-PRINT

Control the display of a print job screen on the control panel.
Use this mode to set whether or not to display a print job screen on the control panel.
This mode is available for a user who does not want to display a print job screen on the control panel.
Setting range:
0: Do not display the screen.
1: Display the screen.[default]

WUEV-SW

Set whether or not to make a sleep notification.
Set whether or not to make a sleep notification to the DS application on the network when the copying machine main unit switched
its operation to or recovered from sleep operation.
Setting range:
0, 1 (0: Make a sleep notification. 1: Do not make a sleep notification.)
Factory setting value: 0

WUEV-INT

Set the interval for a sleep notification.
Set the interval for a sleep notification when "0" is set to WUEV-SW.
Setting range: 0 to 65535 (Unit: second)
Factory setting value: 600

WUEV-POT

Set the port number for the destination of a sleep notification.
Set the port number for the destination of a sleep notification when "0" is set to WUEV-SW.
Setting range: 0 to 65535
Factory setting value: 11427

Canon iR5055, Service Manual

Search results

Summary of Contents for iR5055

Reviews:

Related manuals for iR5055

Brands by name

Popular brands