Adding Front and Back Covers, Sheet Insertions, and Chapter Pages to Copy Sets (Cover/Sheet Insertion)
2-5
Ad
dit
ion
al Co
py
Fun
c
ti
o
n
s
2
Adding Front and Back Covers, Sheet
Insertions, and Chapter Pages to Copy Sets
(Cover/Sheet Insertion)
This function enables you to programme the machine to automatically add front and back covers,
sheet insertions, or chapter pages using a different type of paper stock from that which is used for
the main text. In addition, you may also copy on the front and back covers and the sheet insertions.
IMPORTANT
•
When the machine is operating in the Cover/Sheet Insertion mode, you cannot use the Group, Offset
Group, Rotate Collating, Rotate Grouping, Saddle Stitch, Book
2-Sided, Two-page Separation, Image
Combination, Image Separation, Booklet, Transparency Interleaving, Image Repeat, Mirror Image, and
Form Composition modes.
•
If you use Cover/Sheet Insertion with the remote or cascade copy mode, Auto Orientation is not
performed.
•
If you use Cover/Sheet Insertion with the Automatic Paper Selection mode, Auto Orientation is not
performed.
•
Stapling is not possible when the total number of output paper including sheet insertions exceeds 30
sheets (for A3, A4R-size) or 50 sheets (for A4-size).
•
The Cover/Sheet Insertion mode cannot be selected when you set the Different Size Originals mode in
combination with the Automatic Paper Selection mode.
NOTE
•
When copying on the front cover, back cover, or sheet insertions, these sheets are included in the count
of the total number of copies. If these sheets remain blank, however, they are not included in the count
of the total number of copies.
•
Chapter pages are included in the count of the total number of copies.
■
Front Cover
Adds a front cover sheet to each set of copies. You may also copy on this cover sheet.
R E P O R T
R E P O R T
Printed front cover, selected in the Cover/Sheet Insertion mode.
Copies
Originals
