1
Erasing Shadows and Frame Lines from Copies (Frame Erase)
2-35
Ad
dit
ion
a
l Co
py
Fun
c
ti
on
s
2
3
Set the width of the binding erase by pressing [–] or [+], and press [OK]
→
[Done] in this order.
When entering values in millimetres, you can use
-
(numeric keys) and
.
If you enter values using
-
(numeric keys), you can change the entered values by
pressing [–] or [+].
The specified mode is set and the display returns to the Basic Features screen.
If you enter a value outside the setting range, a message appears on the screen prompting you to
enter an appropriate value.
NOTE
•
If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See “Chapter 3 Selecting and Storing Settings to Suit Your
Needs” in the Reference Guide.)
•
The default setting is 18 mm for the binding erase width. The maximum binding erase width area
is 20 mm.
4
Press
.
Copying starts.
NOTE
•
To cancel this setting, press [Special Features]
→
[Frame Erase]
→
[Cancel] in this order.
•
To cancel all settings and return the machine to the Standard mode, press
.
0
9
C
0
9
