9
Copying Function
Making a Copy
The following is an explanation of the basic procedure for copying a document. For more detailed procedures, see
the references to other guides.
Place Your Originals
If you have placed your originals on the platen
glass, close the feeder after placing your originals.
If necessary, set copy modes on the Regular/
Express Copy Basic Features screen.
Place your originals.
For more information on the copy modes you can
set on the Regular Copy Basic Features screen,
see p. 11 and p. 12.
Preparations
If the following screen is displayed, enter the [Dept.
ID] and [Password]
press
(Log In/Out) on
the touch panel.
Press [Copy] to switch to the Copy function.
If Department ID Management or MEAP
authentication is set, it is necessary to enter an
ID and password. (If an optional card reader is
attached, insert a control card.)
For more information, see Chapter 1, “Before
You Start Using The Machine,” in the Reference
Guide.
For more information on the copy modes you can
set on the Special Features screen, see p. 27 to p.
28.
To set the various copy modes, press [Special
Features].
You can also place paper in the stack bypass to
copy. (For more information, see “Making Prints
Using the Stack Bypass,” in the Reference Guide.)
Placed in the feeder
Placed on the platen glass
Regular Copy Basic Features screen
