2B996-016JA
12
5� OPERATION
①
Refer to the item “ 4. CONNECTION”, connect each component correctly.
②
Turn on the power source of the connected equipment and the camera.
③
Point the lens at the object, adjust the lens iris, focus, etc..
④
Refer to the item “5.1 White Balance”, to do the adjustment.
⑤
Refer to the items “5.2 Gain, 7. MODE SETTING BY ON SCREEN DISPLAY”, select the necessary items.
5� 1 White Balance
For the white balance adjustment of this unit, AWB (Automatic White Balance) and MANU (Manual white balance)
adjustments are provided. To select the desired mode, refer to the items “7.2 (3) WHT BAL (White balance)” .
AWB
(Automatic White Balance)
MANU
(Manual White Balance)
Outline
Adjust white balance by displaying the white
object inside the area set by AWB menu and
pressing the [DATA UP] button.
Adjust the white balance manually using the WHT
BAL menu while shooting the white object.
Note
When the shutter mode is E.TRG, AWB is not
available.
Adjustment is performed by confirming with a
monitor etc.
①
AWB (Automatic white balance)
• Set the MODE to AWB on the WHT BAL menu.
Perform the C.TEMP (color temperature conversion) setting, if necessary.
(Refer to the item “7.2 (3) WHT BAL (White balance)”.)
3200 : Appropriate for shooting under halogen lamps or warm white type lighting.
5600P,
5600C : Appropriate for shooting under sunny daylight type lighting.
• If the index menu/menu is displayed, press the [DISP] button to disable the character display on the menu.
• Shoot a known white object that fills the screen and push [DATA UP] button for approx. 1 second.
• The character AWB blinks on the screen when the AWB starts.
• The character AWB stops blinking when the AWB finishes, and the result is displayed for approx. 1 second.
Result displayed
Meaning
AWB OK
Automatic white balance adjustment finished correctly.
AWB NG LEVEL
LOW
Automatic white balance adjustment cannot be performed because the video level is too low.
Set the video level propely.
AWB NG LEVEL
HIGH
Automatic white balance adjustment cannot be performed because the video level is too high.
Set the video level propely.
AWB NG
C� TEMP LOW
Automatic white balance adjustment cannot be performed because the color temperature is
too low.
If the C.TEMP is set to 5600P, 5600C set to 3200.
If the message appears with the C.TEMP set to 3200, change the illumination or use a color
temperature conversion filter.
AWB NG
C� TEMP HIGH
Automatic white balance adjustment cannot be performed because the color temperature is
too high.
If the C.TEMP is set to 3200, set to 5600P, 5600C.
If the message appears with the C.TEMP set to 5600P, 5600C, change the illumination or use
the color temperature conversion filter.
AWB NG
NOT AVAILABLE
Automatic white balance adjustment cannot be performed because the shutter speed mode is
in E.TRG mode.
AWB NG
Automatic white balance adjustment cannot be performed for other reasons. Such as no white
area is included in an object, etc.
Summary of Contents for JCT-TF5G
Page 39: ...2B996 016JA 39 ...