2B996-016JA
20
(1�3�2) Changing the setting in PW SR mode
MODE
E.TRG
E.TRG
PW SR
TRG.P
PART
OFF
POSI
SHUTTER
<MODE = E.TRG E.TRG = PW SR>
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
1P SR, PW SR, RR
• Input trigger pulse setting at PW SR
• Shutter mode MANU, SS, E.TRG, AUTO
• E.TRG mode
Move up down
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
POSI
NEGA
• Turning partial scanning on/off
OFF : Partial scanning is off
ON : Partial scanning is on
You can set the area for partial scanning.
See "7.5 Partial Scanning".
EXT : You can switch between ON and OFF by using
external controls.
(a) Changing the polarity of the input trigger pulse setting
①
Move the “ ” to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
②
Select either POSI, NEGA by pushing [DATA UP], [DATA DOWN] buttons.
(b) To change the settings for partial scanning
①
Move the “ ” to PART by pushing the [MENU UP] and [MENU DOWN] buttons.
②
Select the mode you want by pushing the [DATA UP] and [DATA DOWN] buttons. (When ON or EXT is set)
③
Move the “ ” to the setting item you want by pushing the [MENU UP] and [MENU DOWN] buttons.
④
Select the setting values you want by pushing the [DATA UP] and [DATA DOWN] buttons.
* If PART is set to OFF, the setting values for partial scanning are not shown.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CMOS cameras
become: fixed pattern noise, white pixels, etc.
Summary of Contents for JCT-TF5G
Page 39: ...2B996 016JA 39 ...