LENSES
E17
5-1-3. Zoom Track Function
The zoom control range (zoom track) can be limited to selected zoom positions.
This function allows virtual settings to be made for the Tele end and Wide end. The zoom track
function is enabled for all servo zoom operations. (This does not affect manual zoom operation.)
The first step which must be taken if the zoom track function is to be used is to set the function to
ON. There are two ways to set this function to ON or OFF. Refer to the following page for the
setting method.
■
Setting the Zoom Track Function to “ON” or “OFF”
A: Setting “ON” or “OFF” on the information display
1
Push the DISPLAY switch to turn on the display.
2
Select [Trk] using the control key, and then push the Set key. [Trk]
and the last setting now blink on the display. (see left figure)
3
Move the left or right key to select ON or OFF.
4
Push the Set key. This completes the setting.
For details, refer to the Information Display Manual.
B: Setting “ON” or “OFF” by operating the switches
The zoom track function can be set to ON or OFF by operating the switch as shown below.
[ I-Gain ]
[Trk]OFF
Shtl
VTR
A 1
FRM1
A 2
V
RET
R
[ ]
MENU
1
AM
RET
IRIS
T
W
MEMO
AUX2
KJ10ex4.5B IASE A
10
㨤
Instant Auto-Iris Switch
Memo Button
To set the
function to
"OFF"
To set the
function to
"ON"
Selection method
Operation
How to ascertain the selection
The zoom range is set to the
mechanical end .
Hold down the Memo
botton and Instant
auto-iris switch
simultaneously for at
least 3 seconds.
The zoom control range is fixed to the
zoom range set last.
(If there is no previous
setting, it is set to the mechanism end point.)
Automatic zooming from
current zoom position to the
closer of the two set positions.
Automatic zooming from current
zoom position to the closer of
the two mechanical ends.
↓
↓
↓
5 OPERATION
Summary of Contents for KJ10EX4.5B IRSE
