background image

Cancel Sending a Document

3-9

Sending Documents

3

Cancel Sending a Document

Follow this procedure to cancel a transmission in progress.

Cancel Sending on a Single Line

1

Press [Stop].

If you are using Direct Sending, an alarm sounds, and the transmission is 
canceled immediately. Press [Set].

If you are using Memory Sending, the following message is displayed:

2

Press [ ] to cancel the transmission.

If you do not want to cancel the transmission, press 

 (#).

After you press [ ] to cancel the transmission, an alarm sounds, and a report 
automatically prints, unless this feature has been turned ‘OFF’. (See “Report 
Settings,” on p. 11-11.)

Stop

12/31/2002

11:48

FAX 833  4423

WORLD  ESTATE,INC.

001

***************************
***

ERROR TX REPORT

***

***************************

TX  FUNCTION  WAS  NOT  COMPLETED

TX/RX  NO

0006

RECIPIENT ADDRESS

761  1298

DESTINATION  ID

JOHN  BARRISTER

ST.  TIME

12/31  11:48

TIME USE

00'00

PAGES  SENT

    0

RESULT

NG

STOP

Summary of Contents for Laser Class 700 Series














































































































































































































































































































































































Reviews: