Setting Up Coded Speed Dialing
2-19
2
Using Speed Dialing
NOTE
• If you want to clear the time you have set, press
(Stop)
➞
repeat the procedure
from the beginning
➞
press
(Clear) at this step
➞
press
(Set).
• If you want to set another time, repeat the procedure from step 15.
• To end this procedure and return to the Standby mode, press
(Stop).
17
To continue registration, and set other options for the current
coded speed dialing code, press [Data Registration].
18
If you want to set the transmission type, press [
▼
] or [
▲
] until
<3.TX TYPE> appears
➞
press [Set].
If you do not want to perform this setting, proceed to step 20.
19
Press [
▼
] or [
▲
] to select the desired transmission type
➞
press [Set].
There are several TX TYPE items to select. For details, see the table below.
●
If you select ‘REGULAR TX’:
❏
Proceed to step 20.
●
If you select another TX Type:
❏
Set the ITU-T password and subaddress for the feature you select.
❏
Proceed to step 20.
The TX TYPE menu includes these items:
➞
➞
Setting
Description
REGULAR TX
Designates the transaction as a normal transmission
with no special features. You can cancel the currently set
TX TYPE by selecting <REGULAR TX>.
C
Set
Data
Registration
Set
Set
Summary of Contents for Laser Class 700 Series
