manualshive.com logo in svg

Canon laser Shot LBP 3300, User Manual

The Canon Laser Shot LBP 3300 is a high-performance laser printer with exceptional speed and accuracy. Its advanced specifications make it an ideal choice for professional document printing. To understand its full potential, look no further than our 88.208.23.73:8080, where you can download the user manual for free and explore all its features.

Share
Download
background image

xix

 

Handling

WARNING

•

Do not attempt to disassemble or modify the printer. There are high-temperature and 
high-voltage components inside the printer which may result in a fire or electrical 
shock.

•

Electrical equipment can be hazardous if not used properly. To avoid injury, do not 
allow children access to the interior of any electrical product and do not let them 
touch any electrical contacts or gears that are exposed.

•

If the printer makes strange noises, or emits smoke, heat or unusual smells, 
immediately turn OFF the power switch, and disconnect the USB cable if it is 
connected. Then, unplug the power plug from the AC power outlet and contact your 
local authorized Canon dealer. Otherwise, this may result in a fire or electrical shock.

•

Do not use highly flammable sprays near the printer. If gas from these sprays comes 
into contact with the electrical components inside the printer, it may result in a fire or 
electrical shock.

•

Always turn OFF the power switch, and disconnect the interface cables when moving 
the printer. Otherwise, the power cord or interface cables may be damaged, resulting 
in a fire or electrical shock.

•

Do not drop paper clips, staples, or other metal objects inside the printer. Also, do 
not spill water, liquids, or flammable substances (alcohol, benzene, paint thinner, 
etc.) inside the printer. If these items come into contact with a high-voltage area 
inside the printer, it may result in a fire or electrical shock. If these items are dropped 
or slipped inside the printer, immediately turn OFF the power switch and disconnect 
the USB cable if it is connected. Then, unplug the power plug from the AC power 
outlet and contact your local authorized Canon dealer.

•

When plugging or unplugging the USB cable when the power plug is plugged in an 
AC power outlet, do not touch the metal part of the connector, as this may result in 
electrical shock.

CAUTION

•

Do not place heavy objects on the printer, as they may tip over or fall resulting in 
personal injury.

•

Be careful when handling the expansion board. Touching the edges or a sharp 
portion of the expansion board may result in personal injury.

•

Turn OFF the power switch for safety when the printer will not be used for a long 
period of time such as overnight. Also, turn OFF the power switch on the right of the 
printer and unplug the power plug for safety when the printer will not be used for an 
extended period of time such as during consecutive holidays.

•

The laser beam can be harmful to human bodies. Since radiation emitted inside the 
printer is completely confined within protective housings and external covers, the 
laser beam cannot escape from the printer during any phase of user operation. Read 
the following remarks and instructions for safety.

- Never open covers other than those instructed in this manual.

Summary of Contents for laser Shot LBP 3300































































































































































































































































































































































































































Reviews:

No comments

Related manuals for laser Shot LBP 3300

Oki C5800 Brochure & Specs preview
C5800
Brand: Oki Pages: 6
Oki C7300 Référence Matérielle preview
C7300
Brand: Oki Pages: 44
Oki C7500 Enhancements Manual preview
C7500
Brand: Oki Pages: 13
Oki C7300 Software Installation Manual preview
C7300
Brand: Oki Pages: 20
Oki C7300 Specifications preview
C7300
Brand: Oki Pages: 2
Oki C5300 Setup Manual preview
C5300
Brand: Oki Pages: 28
Panasonic Panafax UF-7000 Network Connection preview
Panafax UF-7000
Brand: Panasonic Pages: 28
Panasonic KX-PS8000 Setup Manual preview
KX-PS8000
Brand: Panasonic Pages: 68
Panasonic KX-MC6020 Instrucciones De Funcionamiento preview
KX-MC6020
Brand: Panasonic Pages: 120
Panasonic Workio DP-C262 Operating Instructions Manual preview
Workio DP-C262
Brand: Panasonic Pages: 100
Panasonic KX-MB781 - B/W Laser - All-in-One Instrucciones De Funcionamiento preview
KX-MB781 - B/W Laser - All-in-One
Brand: Panasonic Pages: 96
Panasonic Workio DP-6010 Operating Instructions Manual preview
Workio DP-6010
Brand: Panasonic Pages: 130
Oki 10i Maintenance Manual preview
10i
Brand: Oki Pages: 210
Panasonic FP-D355 User Manual preview
FP-D355
Brand: Panasonic Pages: 77
Panasonic FP-7818 Service Manual & Parts Manual preview
FP-7818
Brand: Panasonic Pages: 402
Panasonic DP-8020E Quick Manual preview
DP-8020E
Brand: Panasonic Pages: 54
Panasonic Workio DP-8016P Operating Instructions Manual preview
Workio DP-8016P
Brand: Panasonic Pages: 88
Panasonic DP-1510P Operating Instructions Manual preview
DP-1510P
Brand: Panasonic Pages: 60

Brands by name

Popular brands

Load more brands