0F40-070
You need to register keys and certificates to use SSL encrypted communication.
You need to register keys and certificates or CA certificates to perform IEEE 802.1X authentication.
The procedure for registering keys and certificates/CA certificates varies depending on the system environment. See the
registration procedure according to your environment.
To create keys and certificates
When using the printer by creating keys and server certificates (self-signed certificates), perform the following tasks.
1. Create keys and certificates.
"Creating Keys and Certificates"
2. Check the created key and certificate.
"Checking Keys and Certificates/CA Certificates"
To use the key and certificate/CA certificate saved in the computer on the printer
When using a key and certificate file/CA certificate file to install (register) in the printer, perform the following tasks.
1. Install the key and certificate/CA certificate in the printer.
"Installing Keys and Certificates/CA Certificates"
2. Check the installed key and certificate/CA certificate.
"Checking Keys and Certificates/CA Certificates"
IMPORTANT
About the number of keys and certificates/CA certificates that can be created or installed
(registered)
You can register up to 3 sets of keys and certificates/CA certificates.
If you cannot create or install (register) the keys and certificates/CA certificates, delete any unnecessary ones.
"Deleting Keys and Certificates/CA Certificates"
Specifying Keys and Certificates/CA Certificates
㻟㻢㻜㻌㻛㻌㻡㻝㻠
Summary of Contents for LBP7100Cn
