Video
46
Self Timer
[
MENU]
[
CAMERA SETUP]
[SELF TIMER]
[ON
]
appears.
mode:
In record pause mode, press
.
The camcorder starts recording after a
10-second countdown. The countdown
appears on the screen.
mode:
Press
, first halfway to
activate the autofocus and then fully.
The camcorder will record the photo
after a 10-second countdown. The
countdown appears on the screen.
NOTES
• When the LCD panel is rotated toward
the lens, we recommend pushing the
joystick (
) to hide the joystick guide
and make the
icon appear larger.
• The self timer will be canceled when any
of the following operations are
performed.
- Pressing
(when recording
movies) or
(when taking
photos) once the countdown has
begun
- Turning off the camcorder
- Changing the operating mode
- Setting the camcorder to standby
mode
Automatic Backlight Correction and
Manual Exposure Adjustment
At times, backlit subjects may appear
too dark (underexposed) or subjects
under very strong lights may appear too
bright or glaring (overexposed). To
correct this, you can manually adjust
the exposure or use the automatic
backlight correction.
POINTS TO CHECK
Select a recording program other than
[
FIREWORKS].
Automatic Backlight Correction
When shooting subjects with a strong
light source behind them, you can have
the camcorder automatically correct for
the backlight.
1
Push the joystick (
) to display
the joystick guide.
2
Select (
) [BLC
] and press
.
•
appears on the screen.
• Press
again to end the backlight
correction mode.
(
FUNC.
FUNC.
Start/Stop
PHOTO
Start/Stop
PHOTO
(