Photos
62
[
PROTECT]
Desired
option
[YES]
[OK]
IMPORTANT
Initializing the recording media (
28) will
permanently erase all recordings,
including protected photos.
/
Copying Photos
You can copy photos only from the
built-in memory to the memory card.
Copying Single Photos
1
Open in single photo view the
photo you want to copy (
58).
2
Copy the photo to the memory
card.
[
COPY]
Press
[YES]
Press
twice
Copying Photos from the Index Screen
Options
1
Open the index screen of the
photos recorded in the built-in
memory.
Move the zoom lever toward
W
and
then select the
(built-in memory)
tab.
2
If you want to copy only one
photo, select (
,
) the photo
you want to copy.
3
Copy the photo(s).
[
COPY
]
Desired option
[YES]*
[OK]**
* If you selected [SELECTED PHOTOS] or
[ALL PHOTOS], you can press
to
interrupt the operation while it is in
progress.
** This step is not required when copying a
single photo.
IMPORTANT
Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the operating mode.
NOTES
• If there is not enough space on the
memory card, the camcorder will copy
as many photos as possible before
stopping the operation.
(
[ALL PHOTOS]
Copies all the photos.
[ONE PHOTO]
Copies only the photo marked with the orange
selection frame.
FUNC.
FUNC.
FUNC.
FUNC.
[SELECTED PHOTOS]
Copies all the photos selected in advance
(marked with a
checkmark). Refer to
Pre-
selecting Recordings from the Index Screen
(
FUNC.
FUNC.